Zeena ~ 500CC Classic “Cafe Chopper” by TNT Motorcycles

Over the last decade and half, we have witnessed enormous growth in custom motorcycle building scene in India, with innumerable individuals painstakingly applying stylish and structural alteration to their off-the-rack models and surprised us with their mosaic works! However in India, Royal Enfield is probably first call to chose a donor bike to remodeling for any XYZ bike builder, but what makes the different for  Delhi based TNT Motorcycles, they humbly rejected each parts of the bike but the engine! A 500cc Royal Enfield Engine was used ti buit their first mod : Zeena!

Zeena_Modified_Royal_Enfield_Classic_UCE_TNT_Motorcycles

Hear it from TNT Motorcycles  “Zeena is our first customer build done for a merchant naval Captain Sahil Lamba. It’s based upon a RE500cc classic donor motorcycle. Other than the engine, wheel hubs and front disk nothing has been borrowed from the donor bike. Front suspensions are inverted shocks from Endurance. The rear mono-shock has also been supplied by Endurance but is stiffened with a spacer for lesser travel and added weight. The top tree plate has been milled out from aircraft grade aluminium alloy Duralumin. The chassis is hand built on a jig which sports a double down tube with a single backbone. The backbone joins the lower part of the chassis with a hydraulically bent flat element which houses electricals inside. Engine is again coupled with one off TNT trademark engine fittings. Fuel tank is stretched out from our trademark “shunya” tank shape sporting a cafe class look and so is the front scoop. The bodywork is also accessorised with a SS mesh element which houses rear mono-shock top fitting. The front rubber is a 120mm wide 21 inch Avon coupled with a 240mm wide 18 inch Avon. A mono-bearing housing has been engineered for secondary drive. A duplex chain pulls the massive 240 tyre with 80 spoked clock-anti-clock rim assembly.


A custom swing arm has been fabricated out to carry the rear tyre, all designed, milled and welded in 19 man days in-house. The rear cowl sports a hidden pillion seat assembly; the orange plate detaches making room for a seat to be bolted on. All foot and hand controls have been turned and knurled in house. Painted again in our patriotic colours Gloss Grey and Orange, the sheet metal contrasts with a semi matte painted dark grey chassis. The wiring has been trimmed to a minimum to occupy minimum space also leading to lesser malfunctioning. The engine head has been shaved and ECU Fuel Injection has been converted to 32 point carburettor intake boosting the power enabling it achieve speeds beyond 135 kmph despite a secondary drive and a massive 240 rear tyre. Zeena stances like a cafe racer when you see it approaching and looks like a sports bike from the rear when it passes you by, we call it a Cafe-Chopper.”

Contact TNT Motorcycles

https://www.facebook.com/tntmotorcycles
Dashrath Puri
New Delhi, India
Call : 098738 38370
http://www.tnt-motorcycles.com/
Call Nitin (9971614572) or Naveen (9873838370)

Photo Courtesy : TNT Motorcycles

Note : Please mention us (350CC.com) when you contact TNT Motorcycles.

5 thoughts on “Zeena ~ 500CC Classic “Cafe Chopper” by TNT Motorcycles

  1. Awesome job done with a lot of hardwork. However some of my personal dislikes:
    A baloon tyre on a cafe racer is an absolute no no.
    The seat build is good but the cushioning looks of cheap quality. Also the rear height makes it more like a dirtbike than a cafe racer.
    The tank is too tiny and takes away all the beauty of the motorcycle. Would have preferred a vintage Norton Dominator like tank on it.

Leave a Reply

Your email address will not be published. Required fields are marked *